AURO OtoSys IM100 Automotive Diagnostic and Key Programming Tool

AURO OtoSys IM100 Automotive Diagnostic and Key Programming Tool

OtoSys IM100 Based on a 7-inch Android touchscreen tablet, and equipped with the key programmer UP200, the OtoSys IM100 provides unparalleled Immobilizer and Key Programming functions as well as OE-level diagnostic functions and services!

offer top quality AURO OtoSys IM100 Automotive Diagnostic and Key Programming Tool

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of AURO OtoSys IM100 Automotive Diagnostic and Key Programming Tool


AURO OtoSys IM100 Automotive Diagnostic Tool

OtoSys IM100 from Auro is the ONE tool you need for modern vehicle key programming!
Based on a 7-inch Android touchscreen tablet, and equipped with the key programmer UP200, the OtoSys IM100 provides unparalleled IMMObilizer and Key Programming functions as well as OE-level diagnostic functions and services!

Embedded a 1.6 GHz quad-core processor and a 32-gigabyte solid state drive into a 7-inch touchscreen tablet, the compact IM100 allows you to multitask on the open source Android 4.4 operating system with quick responses. Save a lot repair and maintenance time!




AURO OtoSys IM100 Features:

* Support IMMO functions for different makes and models.
* Equipped with UP200 to support transponder read/write/identification, ECU/EEPROM chip read/write and IMMO password read.
* Display live data is text, graph & analog for easy data review.
* Auto VIN technology can automatically identify the vehicle’s make, model and year information in no time.
* Support relearn parking brake pad after replacement.
* Support forced regeneration and adjusting injectors.
* Support Steering Angle Sensor (SAS) services.
* Support service mileage and service intervals reset.
* Support TPMS sensor relearn.
* Support battery registration and reset.
* Support online update.
NOTE: This function is supported. This function is not supported.
Special Declaration:
Some of the listed functions are manufacture dependent. The functions and vehicle coverage expand with new update release
OtoSys IM100 OtoSys IM600
IMMO
Smart Mode (Guided and Automated Key Learning Function)
Auto Detect Make/Model/Year/System
Read PIN/CS
Read PIN/CS (All Keys Lost)
Key Learning
IMMO ECU Reset/Adaption
IMMO ECU Refresh/Coding
Remote Learning
Audi Q5/A4/A5 2015-2017 Read PIN/CS
BMW FEM/BDC Key Learning and Adaption
Mercedes Key Learning
Programming
EEPROM Read/Write
MCU Read/Write Basic Advanced
Key Programming
IC Card Read/Write
Mercedes Infrared Key Read/Write
Remote Frequency Detect
OE-Level Diagnostics
All Systems for Over 80 Makes and Models
OtoFlash (J2534 ECU Reprogrammer)
Advanced Service Functions
Oil Serive Reset
Parking Brake Pad Relearn After Replacement
Steering Angle Sensor Relearn
Battery Registration and Reset
Diesel Particulate Filter Regeneration
Tire Pressure Monitoring System
ECU Coding
VW/Audi Component Protection
Complete Service Functions
Tool Features
Built-in Rechargeable Li-ion Battery 5000 mAh 15000 mAh
Internet Updatable Wi-Fi Wi-Fi
Multilingual Support
Limited One Year Warranty
Touchscreen 7-inch 10.1-inch
Memory 32 GB 64 GB
Processor Quad-core processor Hexa-core processor
Camera 8.0 Megapixel
Resolution 1024x600 1920x1200

AURO OtoSys IM100 Specifications:
Recommended Use Indoor
Operating System Android™ 4.4.4, KitKat
Processor Cortex-A9 processor (1.6 GHz)
Memory 1GB RAM DDR3 & 32GB ROM
Display 7-inch LCD capacitive touchscreen with 1024x600 resolution
Connectivity Mini USB 2.0;
USB 2.0;
Wi-Fi;
HDMI Type A;
Micro SD card slot (supports up to 32GB);
Sensors Ambient light sensor for brightness auto changing
Audio Input/Output Input: N/A;
Output: buzzer;
Power and Battery 3.7 V/5000 mAh lithium-polymer battery;
Charges via 5 VDC power supply;
Tested Battery Life Around 4.5 hours of continuous use
Battery Charging Input 5 V/1.5 A
Power Consumption 500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V
Operating Temp. 0 to 55°C(32 to 131°F)
Storage Temp. -20 to 60°C (-4 to 140°F)
Operating Humidity 5% - 95% non-condensing
Dimensions (W x H x D) 237.8 mm (9.4”) x 148.6 mm (5.9”) x 35.5 mm (1.4”)
Net Weight 788 g (2.42 lb.)
Supported Automotive
Protocols
ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code,
SAE-J1850 VPW, SAE-J1850PWM,
ISO11898 (Highspeed, Middlespeed, Lowspeed and
Singlewire CAN, fault-tolerant CAN),
SAE J2610, GM UART,UART Echo Byte Protocol,
Honda Diag-H Protocol, TP2.0, TP1.6

Package includes:

1pc x OBD II Cable
1pc x Mini USB Cable
1pc x USB External Power Adaptor
1pc x Quick Guide
1pc x UP200
1pc x APB001 – EEPROM Adaptor
1pc x APB002 – 68HC908 Adaptor
1pc x APA002 – EEPROM Socket
1pc x APA001 – EEPROM Clamp Integrated MC9S12 Cable


Go to Buy: AURO OtoSys IM100 Automotive Diagnostic and Key Programming Tool

Tags: AURO OtoSys, 2018 Autel Scanner
Prev: Latest Single-Sided Standard Key Clamps for SEC-E9 Key Cutting Machine Single-Sided Standard Key Cutting
Next: Auro OtoSys IM600 Diagnostic Key Programming and ECU Coding Tool Update Online Same as Autel MX808IM