M35080V6 EEprom Eraser Programmer

M35080V6 EEprom Eraser Programmer

M35080V6 EEPROM ERASER/PROGRAMMER was been used to read, program, erase Incremental Registers\EEPROM.M35080V6 is easy to use windows XP/2000/98 software.

offer top quality M35080V6 EEprom Eraser Programmer

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of M35080V6 EEprom Eraser Programmer


M35080V6 EEPROM Eraser Programmer

Functions:

1. Read,program,erase incremental Registers\EEPROM
2.Erase time to Delivery State for M35080V6 1-10 minutes
3.Supported all clock rates 2.5, 5.0 and 6 MHz IC's
4.Erase time to Delivery State* 1-3 seconds
5.In-circuit/On-board EEPROM programming
6.On-board EEPROM programming for M35080V6
7.Onboard processor ATmega16 allow to Firmware Update to new versions
8.Self-Check capabilities
9.4 adaptors for SO8 device

Additional ItemsYou'll Need To Use This Tool:

1.Host:A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
2.Power supply:An 12 Volt / 500 MA

Notice:

Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at 0000 The EEPROM memory array 0020-3FFF set to all FF. The Status register set to 10
 

 

Go to Buy: M35080V6 EEprom Eraser Programmer

Tags: ecu programmer, M35080V6 EEPROM ERASER , ECU programming tool , M35080V6 EEPROM PROGRAMMER , M35080V6 chip tuning , M35080V6 , EEPROM Programmer , EEprom Eraser Programmer
Prev: FLY 100 Generation 2 (FLY100 G2) V3.016 Honda Scanner Full Version Diagnosis and Key Programming
Next: U380 OBDII OBD2 EOBD Engine Scanner Trouble Code Reader