Autel MaxiIM IM608 IM508

Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508, which supports MCU, ECU, EEPROM read and write, Mercedes Infrared Key Reading & Writing, Finding the Control Frequency and IC Card Reading & writing.

Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508 is a one of our Autel MaxiIM IM608 IM508 Tools, you can buy Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508 from chinaobd2.com.

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508

Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508

Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508

Autel XP400 KEY & CHIP PROGRAMMER Function List:

Support PC
MCU / EEPROM Chips Read / Write
ECU Read / Write
MC9S12 Encryption Chip Read / Write
Key Read / Write
Mercedes Infrared Key Read / Write
Remote Frequency Detect
IC Card Read/Write

2019082376790857
Autel XP400 KEY & CHIP PROGRAMMER Introduction:

Connect the IM608 tablet to the XP400 Key Programmer (no vehicle connection required) to access the key chip, read, retrieve and write key information, as well as other key related functions. The XP400 includes 12 ports:

19082115664471828748

1. DC Port – provides 12V DC power supply.
2. USB Port – provides data communication and 5V DC power supply.
3. DB 26-Pin Port – connects with the for Mercedes Benz infrared cable, vehicle key cable, ECU cable, MCU cable, MC9S12 cable.
4. Cross Signal Pins – holds the MCU board, MCU spare cable or DIY signal interface.
5. IC Card Induction Area
6. Vehicle Key Slot – holds the vehicle key.
7. Transponder Slot – holds the transponder.
8. Remote Control Transponder Induction Area Figure 2-5 XP400 Views 11
9. Mercedes Infrared Key Slot – holds the Mercedes infrared key.
10. Status LED – indicates the current operating status.
11. Locker – locks the EEPROM component transponder slot to ensure proper functioning.
12. EEPROM Component Transponder Slot – holds the EEPROM plug-in transponder or EEPROM socket.

DC Port : Provides 12 V power supply for the XP400.
USB Port: Provides data communication and power supply for handheld device, PC and XP400.
DB 26-Pin Port:
Five components can be connected to this port:
Mercedes Infrared Cable
APA102 – Remote Match Cable (optional)
APA104 – ECU Cable
APA105– MCU Cable
APA106 – MC9S12 Cable
APA102 – Remote Match Cable (optional)
No.
Color
Definition
Pin correspond to DB26
Note
1
Red
VCC5V
16
2
Black
GND
3/10/25
3
Blue and White
REMOTE_MISO
14
4
Gray and White
REMOTE_MOSI
5
5
Brown and White
REMOTE_CLK
23
6
Green and White
REMOTE_RX_C S
15
APA104 – ECU Cable
No.
Color
Definition
Pin correspond to DB26
Note
1
Red
VCC12V
7
2
Black
GND
25
3
Green
IGN
/
4
Orange
CANL
8
5
Blue
CANH
17
6
Brown
BOOTM
/
7
Yellow
K
18
8
White
LIN
26

APA105 – MCU Cable
No.
Color
Definition
Pin correspond to DB26
Note
1
Red and White
VPP1
20
2
Red and Black
VPP2
12
3
Red and Yellow
+12V
7
4
Red and Blue
VPPR
/
5
Black
GND
25
6
White
S1
14
7
Brown
S2
5
8
Gray
S3
23
9
Blue
S4
11
10
Red
S5
21
11
Orange
S6
13
12
Purple
S7
4
13
Yellow
S8
19
14
Green
S9
2
15
Black
GND
10
Shielded Twisted
16
White
OSC
1
Shielded Twisted
APA106 – MC9S12 Cable
No.
Color
Definition
Pin correspond to DB26
Note
1
Red
+5V
16
2
Black
GND
25
3
Green
XCLKS
2
4
Blue
T/R
11
5
Yellow
RESET
19
6
Black
GND
10
Shielded Twisted
7
White
OSC
1
Shielded Twisted

Cross-shaped Signal Pin: Places MCU board, MCU spare cable or DIY signal cable to read or write MCU and ECU chips.
IC Card Induction Area: Reads and writes IC card information.
Vehicle Key Slot: Holds the vehicle key to read or write vehicle key information.
Transponder Slot: Holds the transponder to read or write transponder information.
Remote Control Transponder Induction Area: Reads and writes remote control transponder information.
Mercedes Infrared Key Slot: Holds Mercedes infrared key to read or write Mercedes vehicle key information.
Status LED: Shows the current operating status of the XP400. See the table below for detailed description.
Indicator
Status
Description
On
Light Green
Powered on and default
Flash Green
Communication
Light Red
Error
Locker : Places EEPROM chip or socket to read or write EEPROM information.

EEPROM Component Transponder Slot : Holds the EEPROM plug-in transponder or EEPROM socket.

Autel XP400 Adapter Parameter
Item
Description
Operating Temperature
-10℃ ~ 60℃ (14℉ ~ 140℉)
Storage Temperature
-20℃ ~ 60℃ (-4℉ ~ 140℉)
Port
Mini USB, VGA_DB15
Input Voltage
5 VDC
Operating Current
< 250 mA
Maximum Consumption
1 W
Device Dimensions (L*W*H)
130 mm * 68 mm * 28 mm
Package Dimensions (L*W*H)
201 mm * 167 mm * 75 mm
Net Weight
466 g

Items Pictures:
201908236737374020190823673737412019082367373739201908236737373820190823673737422019082367373743201908236737374420190823673737372019082367373745

Go to Buy: Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508

Share to Pinterest