ECU Chip Tuning

MultiFlasher is a chip-tuning software intended for reading/writing FLASH and EEPROM memory of ECUs. It can use any adapter supporting J2534 standard, e.g. OpenPort 2.0 by Tactrix.

MultiFlasher ECU Chip Tuning Software for Hyundai Kia Supports J2534 OpenPort 2.0 is a one of our ECU Chip Tuning Tools, you can buy MultiFlasher ECU Chip Tuning Software for Hyundai Kia Supports J2534 OpenPort 2.0 from chinaobd2.com.

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of MultiFlasher ECU Chip Tuning Software for Hyundai Kia Supports J2534 OpenPort 2.0

MultiFlasher ECU Chip Tuning Software for Hyundai Kia Supports J2534 OpenPort 2.0MultiFlasher ECU Chip Tuning Software for Hyundai Kia Supports J2534 OpenPort 2.0MultiFlasher ECU Chip Tuning Software for Hyundai Kia Supports J2534 OpenPort 2.0MultiFlasher ECU Chip Tuning Software for Hyundai Kia Supports J2534 OpenPort 2.0MultiFlasher ECU Chip Tuning Software for Hyundai Kia Supports J2534 OpenPort 2.0

MultiFlasher ECU Chip Tuning Software works with J2534 Interface

MultiFlasher is a chip-tuning software intended for reading/writing FLASH and EEPROM memory of ECUs. It can use any adapter supporting J2534 standard, e.g. OpenPort 2.0 by Tactrix. Before flashing and after reading the program checks the firmware and checksums, and corrects them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.


List of modules and their functions:

Bosch M(G)7.9.8. Only FLASH memory writing through the OBDII. Vehicles: Kia/Hyundai i10, i20, i30, Accent (Verna), Elantra, Pikanto, Rio, Ceed, Cerato, Soul, etc with 1.4L, 1.6L engines and a mechanical accelerator pedal.

Siemens SIMK-31/41/43, SIM2K-47. FLASH memory reading and writing through the OBDII. Vehicles: KIA/Hyundai Coupe, Elantra, SantaFe, Sonata, Tiburon, Tucson, Ceed, Cerato, Sportage, etc with 2.0L and 2.7L engines.

The set of modules: Siemens SIM2K-140/141/142/341/D160. FLASH memory reading through ECU connector and flashing through the OBDII. Vehicles: KIA/Hyundai Carens, Cerato new, Magentis, Sonata, Sorento, Sportage new, ix35, etc with 2.0L and 2.4L engines, and Chevrolet Epica with 2.0L and 2.5L engines.

Siemens SIM2K-241/242/245/С201. Reading and flashing through the OBDII diagnostic link connector. Supports GDS format. Vehicles: Elantra MD 1.8, Sonata new, i40 2.0, ix35 new, Ceed new, Cerato new, Optima new, etc., SsangYong Actyon 2.0, Korando.

BSL TriCore. Reading and flashing of ECU internal and external FLASH/EEPROM memory with Infineon TriCore TC1724, TC1728, TC1738, TC1762, TC1766, TC1767, TC1782, TC1792, TC1793, TC1796, TC1797 processors in BSL mode. The approximate short list of supported ECUs BOSCH M(E)17.9.7 (VAZ/UAZ), and ME17, ME (D, G)17, EDC17 (AMG, Audi, BMW, Citroen, Honda, Hyundai, KIA, Land Rover, Mercedes, Mini, Peugeot, Porsche, Renault, Saab, Skoda, Toyota, Volkswagen, Volvo).

Special functions:

MultiFlasher ECU Chip Tuning Software for Hyundai Kia1
MultiFlasher ECU Chip Tuning Software for Hyundai Kia2

Before flashing and after reading the program checks the firmware and checksums structure, and recalculates them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.
Adapter settings selection:

MultiFlasher ECU Chip Tuning Software for Hyundai Kia3
MultiFlasher ECU Chip Tuning Software for Hyundai Kia4

Package List:


MultiFlasher Chip Tuning Software Update Log:
Multiflasher v3.11 :


Multiflasher v2.26:

Multiflasher v2.25:
Multiflasher v2.24:Multiflasher v2.23:

Multiflasher v2.22:

Multiflasher v2.21:

Go to Buy: MultiFlasher ECU Chip Tuning Software for Hyundai Kia Supports J2534 OpenPort 2.0

Share to Pinterest